Usb Virtual Com Port Windows 10
The various USB interface modules fabricated by Technological Arts are based on the pop FTDI flake FT232RL. Unremarkably, Windows will recognize them when you plug them into a USB port on your computer. If information technology doesn't, you volition need to download and install the appropriate driver from the FTDI website (world wide web.ftdichip.com). Drivers are provided for various versions of Windows. Download and install the correct version for your reckoner's configuration before proceeding.
Now connect a USB cable between a USB port on your PC and the USB interface module you lot are using. Windows should study a new device has been found and proceed to initialize it. To make up one's mind which virtual Deport it has been assigned to, right click the MyComputer icon on your Windows desktop, and select Properties from the popup menu. Side by side, click on the Hardware tab, and click on the Device Managing director button.
Click on the + sign side by side to Ports (COM & LPT). The list of available ports will exist revealed. You will see one entitled USB Serial Port, with the assigned COM port number identified in brackets.
To piece of work with well-nigh of the tools you are likely to use with microcontrollers, the COM port should be 1, 2, three, or 4. If it is college than COM4, you lot'll probably want to change information technology. Exercise this by right-clicking the line "USB Serial Port" and select Properties from the popup menu
Click on the Port Settings tab, then click the Advanced... Button.
Select the COM port Number dropdown box and select a COM port number 2, 3, or 4 (usually COM1 is already in use).
The port number may be reported equally "in use" but you can condone that at this point, if you know that nothing is currently using it.
Click OK, and if Windows warns you nigh a indistinguishable, ignore the warning and click Yes. Click OK and then OK to the port settings. Then close the Device Managing director window. If you want to confirm the port change has indeed been fabricated, click on Device Managing director again and cheque the listed Ports. Now close the Organisation Properties window.
At this point, y'all are ready to use the virtual COM port in any application!
Note that, if you unplug the USB device and plug it back in later, Windows will still remember the COM port assignment, so you won't need to become through this procedure again. However, in that location is a known Windows upshot that affects near applications. The virtual COM port will exist removed from the device manager when the USB cablevision is unplugged, even if an application has the virtual COM port open. The virtual COM port will non be accessible even later on the virtual serial device is reconnected unless the virtual COM port is released by the application prior to the reconnection, which may require endmost the awarding first. It is therefore recommended that the application be closed earlier the USB device is unplugged.
Source: https://www.technologicalarts.ca/shop/documentation/72-accessories/153-configuring-windows-usb-virtual-com-ports.html
Posted by: browncorgentor.blogspot.com
0 Response to "Usb Virtual Com Port Windows 10"
Post a Comment